TUNGALOY ADDS 8XD DRILL BODIES TO ITS DRILLFORCEMEISTER DRILL LINE

DrillForceMeister incorporates a unique head-shank coupling interface that provides exceptional reliability when drilling relatively large diameter holes from 20 millimeters to 41 millimeters. When clamped, the drill head interlocks with the shank at larger contact areas, promoting high hole precisions and qualities. Furthermore, with the SMF flat-edged drill head, drilling operations on inclined or curved surfaces or thin walls susceptible to vibration are made easier and more efficient.

Tool replacement is performed simply by exchanging the drill heads; there is no need to remove the drill body from the chuck or readjust the tool overhang, saving a significant amount of tool setup time.

DrillForceMeister now offers nine 8xD drill bodies in cutting diameters (DC) for 28.0-28.9 millimeters (1.102-1.138 inches), 31.0-31.9 millimeters (1.220-1.256 inches), and 34.0 to 41.9 millimeters (1.339-1.650), in 0.1 millimeter (.0039 inch) increments.