metalworkingmag.com
VOLLMER News

THE VOLLMER VGRIND 360S GRINDING MACHINE IS SUITABLE FOR PCBN MACHINING

To enable tool manufacturers to grind PcBN cutting edges with high precision, Biberach-based sharpening specialist VOLLMER has retrofitted its VGrind 360S grinding machine.

THE VOLLMER VGRIND 360S GRINDING MACHINE IS SUITABLE FOR PCBN MACHINING

An optional dressing unit for the grinding wheel is the key to high-precision grinding of PcBN cutting edges with the VGrind 360S in two work steps, i.e. roughing and finishing.

It's a small step for the VGrind 360S, but a giant leap for the world of tool manufacturers. By adapting its VGrind 360S grinding machine, Swabian sharpening specialist VOLLMER was able to make it suitable for machining PcBN tools (polycrystalline cubic boron nitride). The ultra-hard cutting material PcBN is considered the hardest cutting material in the world after PCD (polycrystalline diamond). PcBN tools can achieve an operating life up to 25 times longer than solid carbide tools and have good chemical resistance even at high temperatures, meaning that PcBN retains almost its original hardness even at 1200 degrees Celsius. PcBN tools are used especially for machining ferrous metals such as grey cast iron and hardened steel.


THE VOLLMER VGRIND 360S GRINDING MACHINE IS SUITABLE FOR PCBN MACHINING

The fact that the VGrind 360S grinding machine is able to precisely machine tools with PcBN is due to its stable wall concept with a rigid and compact design. In addition, the two grinding spindles with grinding wheel set positioned at the C axis pivot point enable efficient multi-layer machining. The high system rigidity, in combination with the drive of the X, Y and Z axes via linear induction motors, allows tool manufacturers to machine a PcBN cutting edge in an oscillating manner. Thermal stability is ensured by a plate heat exchanger that effectively cools the spindles and motors. The integrated spindle indexing of the VGrind 360S stops a spindle at exactly the same position during grinding wheel replacement, thereby reducing planing and run-out errors in grinding wheel packages.


THE VOLLMER VGRIND 360S GRINDING MACHINE IS SUITABLE FOR PCBN MACHINING

The new step that the VGrind 360S has taken is an optional dressing unit for the grinding wheel. After roughing of the PcBN cutting edge, the dressing unit ensures that each grinding wheel regains its precise concentricity and correct geometric shape. Subsequent finishing gives a PcBN tool the desired finishing touch. Customers can also retrofit the optional dressing unit with software update to existing VGrind 360S machines. Tool manufacturers can carry out the installation independently or with the support of the VOLLMER service team in just a few steps.

"We have seen a positive development in the market for PcBN tools worldwide for several years, which is why we have now further developed our VGrind 360S for PcBN machining," says Eric Scheffold, Product Manager at VOLLMER.

www.vollmer-group.com

  Ask For More Information…

LinkedIn
Pinterest

Join the 155,000+ IMP followers