19 {{ "2023-10-19T00:00:00+00:00" | date "MMM" }} '23

Written on {{ "2023-10-19T00:00:00+00:00" | date "longDate" }}

BYSTRONIC News

BYSTRONIC PRESENTS BYBEND STAR 120 – THE COMPACT BENDING MIRACLE

Where applications are too big for a "small" machine and too small for a "big" machine, a special solution is needed. This is the ByBend Star 120.

Read more…

18 {{ "2023-10-18T00:00:00+00:00" | date "MMM" }} '23

Written on {{ "2023-10-18T00:00:00+00:00" | date "longDate" }}

PH HORN News

Gear milling cutters in record time

Horn provides gear milling cutters with a short lead time, focusing on its own circular milling system.

Read more…

18 {{ "2023-10-18T00:00:00+00:00" | date "MMM" }} '23

Written on {{ "2023-10-18T00:00:00+00:00" | date "longDate" }}

OKUMA News

INVITATION TO OKUMA’S “OPEN HOUSE” AT THE EUROPEAN HEADQUARTERS IN KREFELD

Based on the motto “The Future of CNC Machining”, the Okuma Europe GmbH is celebrating the 125th anniversary of the Okuma Corporation as well as the 60th birthday of the CNC control OSP at this year’s “Open House” from 21–23 November 2023.

Read more…

17 {{ "2023-10-17T00:00:00+00:00" | date "MMM" }} '23

Written on {{ "2023-10-17T00:00:00+00:00" | date "longDate" }}

Seco Tools

Seco R&D delivers for Scania

A challenging project with Swedish truck manufacturer Scania brought out the best in Seco’s research and development (R&D) team, who found a way to extend the life of one tool by a factor of 20 when using it to cut a new type of cast iron for their engines.

Read more…

13 {{ "2023-10-13T00:00:00+00:00" | date "MMM" }} '23

Written on {{ "2023-10-13T00:00:00+00:00" | date "longDate" }}

Trumpf News

AIRCRAFT FUEL CONSUMPTION: AIRBUS HELICOPTERS RELIES ON TRUMPF 3D PRINTERS

Airbus Helicopters uses TRUMPF machines to mass-produce aircraft components. 3D printing enables lightweight construction and helps save fuel.

Read more…

13 {{ "2023-10-13T00:00:00+00:00" | date "MMM" }} '23

Written on {{ "2023-10-13T00:00:00+00:00" | date "longDate" }}

NSK

NSK bearings deliver major savings at snack food plant

When a major snack food producer began experiencing repeat failures of the bearings on its cutter lines, a switch to NSK Life-Lube^® housed bearing units delivered savings in excess of €130,000, primarily thanks to the elimination of lost production.

Read more…

13 {{ "2023-10-13T00:00:00+00:00" | date "MMM" }} '23

Written on {{ "2023-10-13T00:00:00+00:00" | date "longDate" }}

Replique News

Replique Launches Material Database at Formnext 2023 to Simplify Selection in Additive Manufacturing

Replique is enhancing the accessibility of collective material knowledge within the 3D printing community, facilitated by its trusted material partners, by launching a new material database at its booth in Hall 12.1, #A107.

Read more…

13 {{ "2023-10-13T00:00:00+00:00" | date "MMM" }} '23

Written on {{ "2023-10-13T00:00:00+00:00" | date "longDate" }}

OPEN MIND News

OPEN MIND at Formnext Expo 2023

OPEN MIND will be presenting the benefits of the hyperMILL^® CAD/CAM system for users of additive manufacturing processes at formnext exhibition from November 7th to 10th, 2023.

Read more…

06 {{ "2023-10-06T00:00:00+00:00" | date "MMM" }} '23

Written on {{ "2023-10-06T00:00:00+00:00" | date "longDate" }}

MAPAL News

MEGA-Deep-Drill-Steel - the new deep drill from MAPAL

With the MEGA-Deep-Drill-Steel, MAPAL showcases the new standard for deep drilling at the EMO, which has been specially designed for machining steel and cast iron.

Read more…

04 {{ "2023-10-04T00:00:00+00:00" | date "MMM" }} '23

Written on {{ "2023-10-04T00:00:00+00:00" | date "longDate" }}

Tungaloy News

AH8000 PVD GRADE ROUND INSERTS ENHANCE EXOTIC MATERIAL TURNING

Tungaloy has further expanded its AH8000 PVD grade insert series by adding ten additional sizes of RCMT-RS turning inserts.

Read more…

Market Overview

AI-Native Machining: From CNC Automation to Intelligent Manufacturing

Case studies

Automated Hydraulic Rotation Systems Optimize Heavy Steel Fabrication

BYSTRONIC PRESENTS BYBEND STAR 120 – THE COMPACT BENDING MIRACLE

Where applications are too big for a "small" machine and too small for a "big" machine, a special solution is needed. This is the ByBend Star 120.

Gear milling cutters in record time

Horn provides gear milling cutters with a short lead time, focusing on its own circular milling system.

INVITATION TO OKUMA’S “OPEN HOUSE” AT THE EUROPEAN HEADQUARTERS IN KREFELD

Based on the motto “The Future of CNC Machining”, the Okuma Europe GmbH is celebrating the 125th anniversary of the Okuma Corporation as well as the 60th birthday of the CNC control OSP at this year’s “Open House” from 21–23 November 2023.

Seco R&D delivers for Scania

A challenging project with Swedish truck manufacturer Scania brought out the best in Seco’s research and development (R&D) team, who found a way to extend the life of one tool by a factor of 20 when using it to cut a new type of cast iron for their engines.

AIRCRAFT FUEL CONSUMPTION: AIRBUS HELICOPTERS RELIES ON TRUMPF 3D PRINTERS

Airbus Helicopters uses TRUMPF machines to mass-produce aircraft components. 3D printing enables lightweight construction and helps save fuel.

NSK bearings deliver major savings at snack food plant

When a major snack food producer began experiencing repeat failures of the bearings on its cutter lines, a switch to NSK Life-Lube^® housed bearing units delivered savings in excess of €130,000, primarily thanks to the elimination of lost production.

Replique Launches Material Database at Formnext 2023 to Simplify Selection in Additive Manufacturing

Replique is enhancing the accessibility of collective material knowledge within the 3D printing community, facilitated by its trusted material partners, by launching a new material database at its booth in Hall 12.1, #A107.

OPEN MIND at Formnext Expo 2023

OPEN MIND will be presenting the benefits of the hyperMILL^® CAD/CAM system for users of additive manufacturing processes at formnext exhibition from November 7th to 10th, 2023.

MEGA-Deep-Drill-Steel - the new deep drill from MAPAL

With the MEGA-Deep-Drill-Steel, MAPAL showcases the new standard for deep drilling at the EMO, which has been specially designed for machining steel and cast iron.

AH8000 PVD GRADE ROUND INSERTS ENHANCE EXOTIC MATERIAL TURNING

Tungaloy has further expanded its AH8000 PVD grade insert series by adding ten additional sizes of RCMT-RS turning inserts.

International

Market Overview

Case studies

Where applications are too big for a "small" machine and too small for a "big" machine, a special solution is needed. This is the ByBend Star 120.

Horn provides gear milling cutters with a short lead time, focusing on its own circular milling system.

Based on the motto “The Future of CNC Machining”, the Okuma Europe GmbH is celebrating the 125th anniversary of the Okuma Corporation as well as the 60th birthday of the CNC control OSP at this year’s “Open House” from 21–23 November 2023.

A challenging project with Swedish truck manufacturer Scania brought out the best in Seco’s research and development (R&D) team, who found a way to extend the life of one tool by a factor of 20 when using it to cut a new type of cast iron for their engines.

Airbus Helicopters uses TRUMPF machines to mass-produce aircraft components. 3D printing enables lightweight construction and helps save fuel.

When a major snack food producer began experiencing repeat failures of the bearings on its cutter lines, a switch to NSK Life-Lube® housed bearing units delivered savings in excess of €130,000, primarily thanks to the elimination of lost production.

Replique is enhancing the accessibility of collective material knowledge within the 3D printing community, facilitated by its trusted material partners, by launching a new material database at its booth in Hall 12.1, #A107.

OPEN MIND will be presenting the benefits of the hyperMILL® CAD/CAM system for users of additive manufacturing processes at formnext exhibition from November 7th to 10th, 2023.

With the MEGA-Deep-Drill-Steel, MAPAL showcases the new standard for deep drilling at the EMO, which has been specially designed for machining steel and cast iron.

Tungaloy has further expanded its AH8000 PVD grade insert series by adding ten additional sizes of RCMT-RS turning inserts.

International

When a major snack food producer began experiencing repeat failures of the bearings on its cutter lines, a switch to NSK Life-Lube^® housed bearing units delivered savings in excess of €130,000, primarily thanks to the elimination of lost production.

OPEN MIND will be presenting the benefits of the hyperMILL^® CAD/CAM system for users of additive manufacturing processes at formnext exhibition from November 7th to 10th, 2023.